Charging
- Connect the charging cable provided to start charging.
- The indicator lights up in red, and charging starts.
- When charging is complete, the indicator goes out.
The charging time is approx. 2.5 hours.
How to pair JVC wireless headphone?
- Check that the power is turned off.
- When connecting for the first time: Hold down power button for 3 seconds until the indicator flashes alternately in red and blue.
- Turn on the Bluetooth function of the BLUETOOTH device.
- Select
JVC HA-S20BTfrom the device list. - The indicator flashes slowly in blue when a connection is completed.
Note:
- During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.
- If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the System automatically turns itself off.
Phone Operation
- Answering the call: Press the power button once quickly when receiving the call.
- Ending the call: Press the power button once quickly during the call.
- Rejecting a call: Press the power button twice quickly when receiving the call.
- Switch the call between headphones and smartphone: Press the power button twice quickly during the call.
Music Operation
- Play/Pause: Press the power button once quickly.
- Volume adjustment: Press Minus Icon / Plus Icon button once quickly. Hold down the button to change the volume continuously.
- Skip to the next track (FF): Press Plus Icon button twice quickly during playback.
- Skip to the previous track or beginning of the current track (REW): Press Minus Icon button twice quickly during playback.
Power Off
- Hold down the power button for about 3 seconds.
- The indicator lights up in red for 1 second before going out and the power turns off.
Troubleshooting
Unable to pair
- Do not release the Maru2 button until the indicator flashes alternately in red and blue.
- When pairing, make sure the BLUETOOTH device is within 1 m of your headphones.
- Turn on the BLUETOOTH device and enable pairing.
- Delete the pairing information on the BLUETOOTH device list and perform pairing again.
The volume is low or the sound is unpleasant
- Increase the volume on this unit or the BLUETOOTH device connected.
The System does not work correctly
Hold down the Maru2 button for at least 20 seconds to reset it.